Category: Robotic Kits

Robolink Rokit Smart – 11 in 1 Programmable Robot Kit

The Rokit Smart is a fun and interactive way to learn robotics. You can make 11 different robots with the Rokit Smart robotics kit, and it contains all the mechanical parts and electronic modules for you need to start exploring the world of robotics. Examples of what you can build include the Line-Following Robot, Rubber Band Gun Robot, Edge-Detection Robot, Interactive Game Robot, and much more.

Make Science and Technology Fun – A Robotics Kit That Grows With You

The Rokit Smart programmable robotics kit is a great choice for learning robotics, electronics and Arduino programming. Explore the basics of robot assembly and get hands on with downloading programs to the Rokit. From there, advance to topics such as programming LEDs, motors and buzzers. The Rokit Smart robot kit is great for any age, and is family-friendly: it allows kids, teens and adults alike to learn Arduino programming and robot assembly in a fun and interactive way. Detailed instructions and step-by-steps videos are available from the Robolink website.

A Classroom Tested STEM Robot Kit

Robolink, a California-based Robotics Learning Center uses the Rokit Smart for its programmable robotics courses. With proper care and attention to wiring – this durable robotics kit can be disassembled and reassembled numerous times by your child for hours of fun and interactive learning as part of an in-classroom or home-school STEM curriculum. The Rokit has also been included in CNET’s ‘Top 10 notable Robots at CES’ 2016 list!

What’s Included

1 Smart Inventor Board (mainboard), 2 DC motors, 2 Wheels, 4 Base Boards, 2 Horn Brackets, 2 Metal Frames, 1 Battery Box, 1 Remote Control, 1 Nut driver/Phillips screwdriver, Assorted nuts, bolts, and screws for robot assembly.

Makeblock is an open source construction platform that turns your ideas into reality, no matter what your idea is and however impossible it looks like.
More resource downloaded: http://learn.makeblock.com/en/starter-robot-kit/

What is Starter Robot Kit?
Starter robot kit, as its name shows, is a start for you to dip your toes in the waters of the robotics and maker world. With a set of beginner-friendly instructions, it takes you step-by-step on learning robotics, electronics and programming.

Enhanced Hands-on Ability
With heavy-duty mechanical parts, easy-to-use electronic modules like Me Orion, ultrasonic sensor, IR receiver (Bluetooth module), you can get an enhanced hands-on experience on building a robot tank or a three-wheel robot car that is programmable.
Easy but Powerful Makeblock
Starter Robot Kits is fully compatible with Makeblock which is a graphical programming environment based on Scratch 2.0 Open Source Code. It makes programming projects and interactive applications easier through simply dragging and dropping function blocks.
Support Scratch & Arduino Programming
Learning programming is way more fun when your code controls a robot. Based around an Arduino board, this kit will teach you all about programming a micro-controller board to control physical objects using sensors.
One Kit, Two Robots
Follow the detailed, beginner-friendly instructions to construct your choice of a robot tank or three-wheel robot car.
Easy Wiring
Modules in this kit all equipped with RJ25 ports for easy wiring. Just by connecting the modules together, robots can be built in a really quick way. All the wiring is simple and very clear.

System & Device Requirements
PC device: MC OS | Windows 7 or above | Windows XP | Chrome OS | Linux
Mobile Device: Not Support

If you have any questions, please feel free to contact us via tec-support@makeblock.com.

Jimu Robot is the only Robotic Building System that anyone can easily BUILD into specific models or your own creations, PROGRAM and CODE to move with any smart device, and GET SMARTER with STEM skills that will help you in school and life. Jimu Robot engages kids with REAL ROBOTICS, utilizing real robotic servo motors and real robotic sensors for real robotic programming and coding.

The JIMU Robot BuzzBot & MuttBot Kit includes everything a kid needs to build and program the playful BuzzBot, his trusty companion MuttBot or an original JIMU Robot creation. Two, lively robots with 6 robotic servo motors and over 250 snap-together parts deliver STEM learning smartly and memorably. Program JIMU robots to move and play using Blockly code or with the PRP (Pose, Record, Play) function.

Developed based on Arduino, this 6-Legs spider robot simulates the movements of 6-leg insects via programming in the Arduino IDE and controlling 19 servos.

In this robot kit, a complete set of hardware devices are provided as well as example code for your learning. You can also write the code for control by yourself. By programming the robot, you can control each leg and even each joint, and truly feel the thrill and joy of learning and making.

YouTube Video Link:

https://youtu.be/54Pl00NKJDI

Download Tutorials:

https://www.adrive.com/public/2KZf9b/Adeept6LegSpiderRobotKitForArduinoV2_0.zip

Package List:

1 Set Acrylic Plates
1x Adeept Arduino UNO R3
1x Adeept Arduino Nano
1x Adeept PCA9685-Based 32-Channel PWM Servo Driver
1x Adeept Remote Control Board
1x NRF24L01 2.4G Wireless Transmission Module
1x NRF24L01 2.4G Wireless Transmission Module with PA and Antenna
20x Servo(SG92R)
1x Ultrasonic Module
1x RGB LED Module
1x Passive Buzzer Module
2x 18650×2 Battery Holder
1x 3-Pin Wire
10x Male to Female Wire
10x Female to Female Wire
1x Large Cross Screwdriver
1x Slotted Screwdriver
1x Cross Screwdriver
1x Cross Socket Wrench
1x USB Cable
1x Mini USB Cable
1x Wingding Pipe
1x Ribbon
1x Rubber Sleeve
40x M2 Nut
44x M3 Nut
6x M1.4*6 Self-tapping Screw
6x M3*10 Countersunk Head Screw
50x M2*8 Screw
4x M2*10 Screw
8x M3*5 Screw
34x M3*8 Screw
2x M3*14 Screw
4x M3*30 Screw
6x M3*6 Copper Standoff

Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.

Component listing:
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs Potentiometer
1pcs 5V Relay
1pcs Breadboard
1pcs Remote
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Photoresistor
1pcs Thermistor
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
120pcs Resistor
10pcs Female-to-male Dupont Wire

Learn about the wonder of robotics with the 4M Table Top Robot. The Table Top Robot is a hands-on science kit that teaches the basics of robotics by constructing a working robot crab. When activated, the robot crab scuttles under its own power and changes direction when it encounters an obstacle. Place it on a tabletop and watch it perform acrobatic tricks. No special tools or knowledge required; the kit contains detailed instructions and all the necessary parts. Requires one AAA battery (not included). Recommended for ages 8 years and up.

Boost your LEGO building experience with the amazing LEGO BOOST Creative Toolbox. Build and customize Vernie, your own personal talking robot friend, code its behavior and complete fun activities with the included playmat. Speak to Vernie and it will respond with facial expressions that reflect its mood. Vernie can move in all directions at variable speed on its large tracks, see objects and colors, sense distance, grip and carry accessories, make hand gestures and launch darts from its shoulder mounted shooter! Vernie also senses and reacts to impacts and knows when you pick it up. Rebuild Vernie to create the M.T.R.4 (Multi-Tooled Rover 4), Guitar4000, Frankie the Cat or the AutoBuilder, all controlled via your smart device with the free downloadable app that also includes digital LEGO Building Instructions for all 5 models, plus cool activities and ideas to spark your imagination.

Build and program robots with this compete robotics engineering system. Using sensors, motors, a core controller, and hundreds of snap-together building pieces, you can follow the instructions to assemble 12 different robots. The versatile parts also allow you to make robots according to your own designs. This fun robotics curriculum starts out with instructions for building simple robots, teaching you how the sensors can be used to control the robots. Build an ultrasound robot that can avoid obstacles, a line tracker robot, a touch sensor robot, and a doodling robot. Move on to more complex robots that have multiple functions, such as a ball-manipulating robot, a crawling robot, and a grabbing robot. Finally build some functional, helpful robotics including an automated door-opening robot and a protected robotic safe to store your valuables. After you have mastered all of the robotic models in the instructions, you will have the tools and knowledge you need to go on and build and program your own amazing robotic creations. The robots can be controlled directly in real-time and programmed to perform series of commands using an easy-to-use, free downloadable app on tablets and smartphones. The app wirelessly connects to the core controller using a Bluetooth low energy connection. You can create more complex programs using the open source visual block programming editor “Google Blockly” on a PC with a USB connection to the core controller. The app requires a tablet or smartphone running iOS or Android. A 96-page, full-color manual features step-by-step illustrated building instructions and instructions for how to program and operate the models. Using the core controller, the ultrasonic sensor is able to detect an object and measure its proximity. Core Controller Your robot’s brain! The core controller features a Bluetooth connection to tablets and smartphones and a USB connection to a PC. You can download programs from your devices to the core controller.